
70
OPERATION
Emergency Stopping
The following chart lists methods for stopping the snowmobile in the
event of an emergency. Refer to page 68 for more i nformation about
the engine stop switch and throttle safety switch.
SYSTEM WHAT IT DOES THROTTLE
CONDITION
Ignition Switch Interrupts ignition circuit All
Brake Slows jackshaft All
Engine Stop Switch Interrupts ignition circuit All
Throttle Safety Switch Interrupts ignition circuit All
Tether Switch (Option) Interrupts ignition circuit All
Emergency Starting
Your machine is equipped with a recoil under t he hood for emergency
starting.
1. Turn the key to ON.
2. Pull the kill switch (shut-off switch) up to RUN.
3. Grasp the starter handle and pull slowly until the recoil engages.
4. Slowly pull t he recoil handle, rotating the engine until it becomes
harder to pull. The engine is now near top dead center.
5. Allow the rope to partially retract into the recoil (until a
comfortable stance for starting is achieved).
6. Pull the handle abruptly to start the engine.
Excessive or repetitive use of brakes for high speed stops will
cause an overheated brake system. This overheated condition
could cause sudden loss of brakes and/or fire, resulting in
serious injury or death.
When traveling on long downhill stretches, pump the brakes.
Riding the brakes may cause the brake system to overheat and
result in brake failure.
WARNING
Comentários a estes Manuais